Materials Algorithms Project
Data Library

Data Library MAP_DATA_BAINITE_NORM

1. Provenance of code.
2. Purpose of code.
3. Description of subroutine's operation.
4. References.
5. Any additional information.
6. Keywords.
7. Download source code.
8. Links.

Provenance of Source Code

Etienne Girault,
Department MTM,
K.U. Leuven,
de Croylaan 2
3001 Leuven,
Belgium

Top | Next

Purpose

Normalised kinetics of isothermal bainite transformation at 416°C for a steel of composition: Fe-0.11C-1.50Si-1.53Mn-0.008P-0.006S-0.043Sol.Al-0.035 wt.% after intercritically annealing at 750°C for 1 min, 4 mins or 1 hour.

Top | Next | Prev

Description

Heat treatment:
Intercritically annealed at 750°C for 1 minute, 4 minutes or 1 hour and then cooled at a rate between 75 and 100°C.s to isothermal bainite temperature of 416°C.

This was carried out in a Theta dilatometer using 15 x 4 x 0.8 mm flat specimen, using same equipment and steel as in reference [1].

This distribution consists of two files: bainnorm.txt is an ASCII text version of this document; bainnorm.dat is an ASCII text file containing the data, formatted as follows:

Column 1: 1 minute time / s
Column 2: 1 minute normalised bainite / %
Column 3: 4 minutes time / s
Column 4: 4 minutes normalised bainite / %
Column 5: 1 hour time / s
Column 6: 1 hour normalised bainite / %

Top | Next | Prev

References

1. Jacques, P., Girault, E., Van Humbeeck, J., Aernoudt, E. and Delannay, F. (1997): IV European Symposium on Martensitic Transformations (Esomat '97), Enschede, The Netherlands, July 1997, in press.

Top | Next | Prev

Further Comments

None.

Top | Next | Prev

Keywords

materials, data, kinetics, isothermal, bainite, transformation, steel

Top | Next | Prev

Download data

Download data library

Top | Prev