MAP originated from a joint project of the National Physical Laboratory and the University of Cambridge.
MAP Website administration / map@msm.cam.ac.uk![[MAP Logo]](../../maplogo1.gif)
Kazutoshi Ichikawa,
Nippon Steel Corporation,
Welding and Joining Research Center,
20-1 Shintomi, Futsu, Chiba 293-8511,
Japan
Provides chemical and geometrical data on oxide inclusions in low-alloy, ferritic steel welds.
The file which is downloaded contains the following information:
Table 1 lists chemical compositions of welds / wt.%. Only deoxidising compositions (Si, Mn, Al, Ti), nitrogen and oxygen concentrations are listed.
Table 2 lists geometrical characteristics of inclusions in the welds. The first column is the identification mark, the second the mean three--dimensional particle diameter in micrometres, the third the inclusion volume fraction multiplied by 1000, the fourth the number of particles per cubic millimetre, the fifth the mean centre-to-centre interparticle spacing in micrometres, the sixth the mean surface-to-surface interparticle spacing in micrometres. The last column gives the reference number.
Table 3 lists the chemical compositions of inclusions / wt.%.
None.
materials, data, low alloy, steel, weld, weld deposit, ferritic, composition, oxide, inclusion, precipitate, particle, particle size, volume fraction
MAP originated from a joint project of the National Physical Laboratory and the University of Cambridge.
MAP Website administration / map@msm.cam.ac.uk