Future Developments of Metals and Ceramics
Published by the Institute of Materials, 1992, pp. 27-75.
Edited by J. A. Charles, G. W. Greenwood and G. C. Smith.
H. K. D. H. Bhadeshia
Mathematical Modelling of Weld Phenomena
Published by the Institute of Materials, 1993, pp. 109-182.
Edited by H. Cerjak and K. E. Easterling.
H. K. D. H. Bhadeshia and L. E. Svensson
"An Aspect of the Nucleation of Burst Martensite in Steels"
Journal of Materials Science, Vol. 17, 1982, pp. 383-386
H.K.D.H. Bhadeshia
"A Thermodynamic Analysis of Isothermal Transformation Diagrams"
Metal Science, Vol. 16, 1982, pp. 159-165
H.K.D.H. Bhadeshia
"An atom-probe study of Bainite"
Proc. of the International Solid-Solid Phase Transformations Conference, Pittsburgh, 1981, pp. 993-998
Published by The Metallurgical Society of the A. I. M. E., Warrendale, PA, USA.
H.K.D.H. Bhadeshia and A. R. Waugh
"Bainite: The Incomplete-Reaction phenomenon and the approach to equilibrium"
Proc. of the International Solid-Solid Phase Transformations Conference,
Pittsburgh, 1981, pp. 1041-1048.
Published by The Metallurgical Society of the A. I. M. E., Warrendale, PA, USA.
H.K.D.H. Bhadeshia
"Reply to Dahmen's comments on BCC-BCC Orientation Relationships,
Surface Relief and Displacive Phase Transformations in Steels"
Scripta Metallurgica, Vol. 15, 1981, p. 961.
H.K.D.H. Bhadeshia
"Ferrite Formation in Heterogeneous Dual-Phase Steels"
Scripta Metallurgica, Vol. 17, 1983, pp. 857-860
H.K.D.H. Bhadeshia
"The Growth Rate of Allotriomorphic Ferrite in Low-Alloy Steel Weld Deposits"
Proceedings of The Third Scandinavian Symposium on Materials Science,
Oulu, Finland, 1983, pp. 73-78,
Acta Universitatis Ouluensis, Oulu Univeristy, Finland
H.K.D.H. Bhadeshia, L.-E. Svensson and B. Gretoft
"The Structure of the Broad Faces of Ferrite Plates"
Scripta Metallurgica, Vol. 17, 1983, pp. 1475-1479
H.K.D.H. Bhadeshia
"The Homogenisation of Single-Crystal Superalloys"
Proceedings of the Sheffield Centenary Conference on Perspectives
in Metallurgical Development,
The Metals Society, London, 1984, pp. 183-187
G.S. Hillier and H.K.D.H. Bhadeshia
"The Influence of Alloying Elements on the Formation of
Allotriomorphic Ferrite in Low-Alloy Steel Weld Deposits"
Journal of Materials Science Letters, Vol. 4, 1985, pp. 305-308
H.K.D.H. Bhadeshia, L.-E. Svensson and B. Gretoft
"Discussion of: The Bainite Transformation in a Silicon Steel"
Metallurgical Transactions A, Vol. 16A, 1985, pp. 466-468.
Metallurgical Transactions A, Vol. 20A, 1989, pp. 330-332.
Metallurgical Transactions A, Vol. 20A, 1989, pp. 333-334.
H.K.D.H. Bhadeshia and D.V. Edmonds
"Fe-Cr-C Hardfacing Alloys for High-Temperature Applications"
Journal of Materials Science, Vol. 21, 1986, pp. 1015-1019
L.-E. Svensson, B. Gretoft, B. Ulander and H.K.D.H. Bhadeshia
"The Austenite Grain Structure of Low-Alloy Steel Weld Deposits"
Journal of Materials Science, Vol. 21, 1986, pp. 3947-3951
H.K.D.H. Bhadeshia, L.-E. Svensson and B. Gretoft
"Prediction of the Microstructure of Submerged-Arc Linepipe Welds"
Proceedings of the Third International Conference on Welding
and Performance of Pipelines, 1986,
published by the Welding Institute, Abington, U.K.
H.K.D.H. Bhadeshia, L.-E. Svensson and B. Gretoft
"An Analysis of the Primary Microstructure of Cr and Mo Containing Low-Alloy Steel Welds"
Proceedings of the 4th Scandanavian Symposium on Materials Science,
Norwegian Institute of Technology, Norway.
August 25-26, 1986, pp. 153-158
H.K.D.H. Bhadeshia, L.-E. Svensson and B. Gretoft
"Theory for the formation of Allotriomorphic Ferrite in Steel Weld Deposits"
Proceedings of an International Conference on Welding Metallurgy
of Structural Steels,
published by The Metallurgical Society of the AIME,
Warrendale, Pennsylvania.
Edited by J. Y. Koo, 1987, pp. 517-530.
H.K.D.H. Bhadeshia, L.-E. Svensson and B. Gretoft
"Solute-Segregation, Oxygen Content and the Transformation-Start Temperatures of Steel Welds"
Proceedings of an International Conference on Welding Metallurgy
of Structural Steels,
published by The Metallurgical Society of the AIME,
Warrendale, Pennsylvania.
Edited by J. Y. Koo, 1987, pp. 495-504.
M. Strangwood and H.K.D.H. Bhadeshia
"Reaustenisation in Steel Weld Deposits"
Proceedings of an International Conference on Welding Metallurgy
of Structural Steels,
published by The Metallurgical Society of the AIME,
Warrendale, Pennsylvania.
Edited by J. Y. Koo, 1987, pp. 549-563.
J. R. Yang and H.K.D.H. Bhadeshia
"Stability, Wear Resistance and Microstructure of Fe-Cr-C and Fe-Cr-Si-C Hardfacing Alloys"
Proceedings of Heat Treatment 1987,
Institute of Metals, London, July 1988, pp. 39-43.
S. Atamert and H.K.D.H. Bhadeshia
"Bainite in Steels"
Proceedings of an International Conference: Phase Transformations '87,
Institute of Metals, London,
Edited by G. W. Lorimer, 1988, pp. 309-314.
H. K. D. H. Bhadeshia
"Coupled Diffusional/Displacive Transformations"
Proceedings of an International Conference: Phase Transformations '87,
Institute of Metals, London,
Edited by G. W. Lorimer, 1988, pp. 322-325.
G.B. Olson, H.K.D.H. Bhadeshia and M. Cohen.
"Ferrite Nucleation at Ceramic/Steel Interfaces"
Proceedings of an International Conference: Phase Transformations '87,
Institute of Metals, London, Edited by G. W. Lorimer, 1988, pp. 466-470.
M. Strangwood and H. K. D. H. Bhadeshia
"The Bainite to Austenite Transformation"
Proceedings of an International Conference: Phase Transformations '87,
Institute of Metals, London, Edited by G. W. Lorimer, 1988, pp. 203-206.
J. R. Yang and H. K. D. H. Bhadeshia
"The Bainite Transformation in Heterogeneous Steels"
Proceedings of an International Conference: Phase Transformations '87,
Institute of Metals, London, Edited by G. W. Lorimer, 1988, pp. 207-210.
S. A. Khan and H. K. D. H. Bhadeshia
"The Element Redistribution Associated with the
Incomplete-Reaction Phenomenon in Bainitic Steels:
An Atom-Probe Investigation"
Proceedings of an International Conference:
Phase Transformations '87, Institute of Metals, London,
Edited by G. W. Lorimer, 1988, pp. 211-215. I. Stark, G. D. W. Smith
and H. K. D. H. Bhadeshia
"The Non-Uniform Distribution of Inclusions in Low-Alloy
Steel Weld Deposits"
Metallurgical Transactions, Vol. 19A, 1988, pp. 669-674.
A. A. B. Sugden and H. K. D. H. Bhadeshia
"Extrinsic and Intrinsic Nodes in the Gamma Prime Phase of a Single-Crystal Superalloy"
Acta Metallurgica, Vol. 36, 1988, pp. 95-109.
G. S. Hillier, C. M. F. Rae and H. K. D. H. Bhadeshia
"Diffusional Formation of Ferrite in Iron and its Alloys"
Scripta Metallurgica, Vol. 21, 1987, pp. 1605-1609
H. K. D. H. Bhadeshia.
"A Model for the Prediction of Strength in Steel Welds"
Metallurgical Transactions A, Vol. 19A, 1988, pp. 1597-1602
A. A. B. Sugden and H. K. D. H. Bhadeshia
"Nitrogen in Submerged-Arc Weld Deposits"
Journal of Materials Science Letters, Vol. 7, 1988, pp. 610-612.
H. K. D. H. Bhadeshia, L. -E. Svensson and B. Gretoft
"Computer-Aided Design of Electrodes for Arc Welding Processes: Part II"
Proceedings of the Second International Conference on
Computer Technology in Welding, The Welding Institute,
Cambridge, 1988, paper 24.
L. -E. Svensson, B. Gretoft, A. A. B. Sugden and H. K. D. H. Bhadeshia
"The Design of Submerged Arc Weld Deposits for High-Strength Steels"
Proceedings of an International Conference on Improved
Weldment Control using Computer Technology, Vienna, Austria,
4-5 July 1988. Published by Pergamon Press, Oxford, 1988, pp. 71-78.
L. -E. Svensson and H. K. D. H. Bhadeshia
"Theoretical Analysis of changes in Cementite Composition during the Tempering of Bainite"
Materials Science and Technology, Vol. 5, 1989, pp. 131-137.
H. K. D. H. Bhadeshia.
"Coupled Diffusional/Displacive Transformations"
Acta Metallurgica, Vol. 37, 1989, pp. 381-389.
G. B. Olson, H. K. D. H. Bhadeshia and M. Cohen
"Thermodynamic Estimation of the Liquidus, Solidus and Ae3 Temperatures
and Phase Compositions for Low-Alloy Multicomponent Steels"
Materials Science and Technology, Vol. 5, 1989, pp. 977-984.
A. A. B. Sugden and H. K. D. H. Bhadeshia
"Modelling the Microstructure in the Fusion Zone of Steel Weld Deposits"
Recent Trends in Welding Science and Technology (TWR'89),
eds. S. A. David and J. M. Vitek, ASM International,
Ohio, U. S. A., 1989, 189-198.
Also issued as Document IIA 831/91 by the International Institute for Welding.
H. K. D. H. Bhadeshia
The Orientation Relationships Between Adjacent Plates of
Acicular Ferrite in Steel Weld Deposits"
Materials Science and Technology, Vol. 5, 1989, pp. 93-97.
J. R. Yang and H. K. D. H. Bhadeshia
"The Interpretation of Dilatometric Data for Transformations in Steels"
Journal of Materials Science Letters, Vol. 8, 1989, pp. 477-478.
M. Takahashi and H. K. D. H. Bhadeshia
"The Microstructure of Submerged-Arc Weld Deposits for
High-Strength Steels"
Journal of Materials Science, Vol. 24, 1989, pp. 3180-3188.
H. K. D. H. Bhadeshia and L.-E. Svensson
"Effect of Alloying Additions on the Microstructure
and Properties of Vertical-Up Manual Metal Arc Welds -
Part I: Method of theoretical assessment"
Joining and Materials, Vol. 2, 1989, pp. 182R-187R.
H. K. D. H. Bhadeshia and L.-E. Svensson
"Effect of Alloying Additions on the Microstructure
and Properties of Vertical-Up Manual Metal Arc Welds -
Part II: Results and Discussion Joining and Materials,
Vol. 2, 1989, pp. 236R-238R
H. K. D. H. Bhadeshia and L.-E. Svensson
"Lower Acicular Ferrite"
Metallurgical Transactions A, Vol. 20A, 1989, pp. 1811-1818.
A. A. B. Sugden and H. K. D. H. Bhadeshia
"The Estimation of Non-Uniform Elongation in Low-Alloy Steel Weld Deposits"
Journal of Materials Science, Vol. 25, 1990, pp. 613-618.
A. A. B. Sugden and H. K. D. H. Bhadeshia
"Some Unresolved Issues in Phase Transformation Theory: The Role of Microanalysis"
J. de Physique, Vol. 50, 1989, C8-389-394.
H. K. D. H. Bhadeshia
"Production and Metallurgy of Advanced Bainitic Steels"
Steel Technology International,
1989, Sterling Publications, pp. 289-294.
H. K. D. H. Bhadeshia
"Bainite: The Current Situation"
Encyclopaedia of Materials Science and Engineering,
Supplementary Volume 2, ed. R. W. Cahn, Pergamon Press,
Oxford, U. K., 1990, pp. 719-724. H. K. D. H. Bhadeshia
"The Bainite Transformation in Chemically Heterogeneous
300M High-Strength Steel"
Metallurgical Transactions A, Vol. 21A, 1990, pp. 859-875.
S. A. Khan and H. K. D. H. Bhadeshia
"Reaustenitisation Experiments on Some High-Strength Steel Weld Deposits"
Materials Science and Engineering, Vol. A118, 1989, pp. 155-170.
J. R. Yang and H. K. D. H. Bhadeshia
"The Distribution of Substitutional Alloying Elements During
the Bainite Transformation"
Metallurgical Transactions A, Vol. 21A, 1990, pp. 847-845.
I. Stark, G. D. W. Smith and H. K. D. H. Bhadeshia
"Microstructural Entropy and the Scatter in Toughness"
Recent Trends in Welding Science and Technology (TWR'89),
eds. S. A. David and J. M. Vitek, ASM International,
Ohio, U. S. A., 1989, 745-748.
A. A. B. Sugden and H. K. D. H. Bhadeshia
"Silicon Modification of Iron Base Hardfacing Alloys"
Recent Trends in Welding Science and Technology (TWR'89),
eds. S. A. David and J. M. Vitek, ASM International,
Ohio, U. S. A., 1989, 273-278.
S. Atamert and H. K. D. H. Bhadeshia
"Complete Reaustenitisation in Multirun Steel Weld Deposits"
Recent Trends in Welding Science and Technology (TWR'89),
eds. S. A. David and J. M. Vitek,
ASM International, Ohio, U. S. A., 1989, 205-210.
R. Reed and H. K. D. H. Bhadeshia
"A Model for the Transition from Upper to Lower Bainite"
Materials Science and Technology, Vol. 6, 1990, pp. 592-603.
M. Takahashi and H. K. D. H. Bhadeshia
"Coupled Diffusional/Displacive Transformations,
Part II: Solute Trapping"
Metallurgical Transactions A, Vol. 21A, 1990, 805-809.
G. B. Olson, H. K. D. H. Bhadeshia and M. Cohen
"The Dislocation Density of Acicular Ferrite in Steel Welds"
American Welding Journal, Vol. 69, 1990, pp. 305s-307s.
J. R. Yang and H. K. D. H. Bhadeshia
"Control of Weld Metal Microstructure and Properties"
The Metallurgy, Welding and Qualification of Microalloyed
(HSLA) Steel Weldments,
eds. J. T. Hickney, D. G. Howden and M. D. Randall,
American Welding Society, November 1990, pp. 34-69a.
H. K. D. H. Bhadeshia
PAPERS 1991-1995
"High-Strength Steels"
Future Aspects of Metals and Ceramics,
Institute of Materials,
eds. J. A. Charles, G. W. Greenwood and G. C. Smith, 1992, pp. 25-74.
H. K. D. H. Bhadeshia
"The Microstructure as a Time-Temperature Recorder: Remaining Life Prediction"
Heat and Surface '92,
ed. I. Tamura,
Japan Technical Information Service, Tokyo, 1992, pp. 19-24.
H. K. D. H. Bhadeshia
"Models for Acicular Ferrite"
International Trends in Welding Research,
eds. S. A. David and J. M. Vitek,
ASM International, Ohio, USA, 1992, pp. 213-222.
H. K. D. H. Bhadeshia
"Microstructural Development in an HSLA80 Laser Beam Weldment"
Proceedings of the Society of Photo-Optical Instrumentation
Engineers,
Vol. 2500, 1994, pp. 846-853.
E. A. Metzbower, P. E. Denney, W. Pratt and H. K. D. H. Bhadeshia
"Computer Modelling of Low Alloy Steel Welds"
Welding & Metal Fabrication, Vol. 64, 1995, 23-24.
A. J. Summerfield, T. Cool, B. R. Keville and H. K. D. H. Bhadeshia
"The Strength of Ni-base Superalloys - a Bayesian Neural Network Analysis"
Proceedings of the 5th International Symposium on Advanced Materials, Pakistan, (1995) 659-666.
J. Jones, D. J. C. MacKay and H. K. D. H. Bhadeshia
"Diffusion of Carbon in Substitutionally-Alloyed Austenite"
Journal of Materials Science Letters, Vol. 14, 1995, 314-316.
S. S. Babu and H. K. D. H. Bhadeshia
"Changes in Precipitates and Dispersed Particles During Heat-Treatment of Alloy 102, a Mechanically Alloyed Ni Base Superalloy"
Materials for Advanced Power Engineering,
ed. D. Coutsouradis, Kluawer Academic Publishers, Netherlands, 1994,
pp. 971-978
K. Murakami and H. K. D. H. Bhadeshia
"Transparent Steel: The Teaching of Creative Design"
Materials World, March 1995, 128-130.
H. K. D. H. Bhadeshia
"Modelling of Fundamental Phenomena in Welds"
Modelling and Simulation in Materials Science and Engineering,
Vol. 3, 1995, 265-288.
T. Zacharia, J. M. Vitek, J. A. Goldak, T. A. Debroy,
M. Rappaz and H. K. D. H. Bhadeshia
"Calculation of Microstructure and Properties of
Steel Welds"
Second Griffith Conference on Micromechanisms of Fracture
and Their Structural Significance,
Institute of Materials, 1995, pp. 15-24.
H. K. D. H. Bhadeshia
"Competitive Effects of Niobium and Niobium Carbides
on the Kinetics of the Bainite Reaction"
Proceedings of Solid-Solid Phase Transformations '94, 1994
T. Maurickx, G. Rees and H. K. D. H. Bhadeshia
"Changes in Precipitates and Dispersed Particles During Heat-Treatment of a Mechanically Alloyed Ni Base Superalloy"
Proceedings of PM'94, Paris, European Powder Metallurgy Association, France,
Volume I, 1994, pp. 543-546.
K. Murakami, H. Harada and H. K. D. H. Bhadeshia
"Modelling the Inclusion Nucleation Potency in Steel Welds"
Modelling and Control of Joining Processes,
ed. T. Zacharia,
American Welding Society, Florida, U.S.A., 1993, pp. 195-202.
J. M. Gregg and H. K. D. H. Bhadeshia
"Model for Boron Effects in Steel Welds"
Modelling and Control of Joining Processes,
ed. T. Zacharia,
American Welding Society, Florida, U.S.A., 1993, pp. 153-160.
H. K. D. H. Bhadeshia and L.-E. Svensson
"Calculation of the Volume Fraction of Phases from CCT Curves"
Modelling and Control of Joining Processes, ed. T. Zacharia,
American Welding Society, Florida, U.S.A., 1993, pp. 306-313.
E. A. Metzbower and H. K. D. H. Bhadeshia
"Modelling of Precipitation Sequences at Dissimilar Steel Joints"
Modelling and Control of Joining Processes, ed. T. Zacharia,
American Welding Society, Florida, U.S.A., 1993, pp. 215-221.
J. M. Race and H. K. D. H. Bhadeshia
"Modelling of Brittle Zones in the HAZ of Steel Welds"
Modelling and Control of Joining Processes, ed. T. Zacharia,
American Welding Society, Florida, U.S.A., 1993, 186-193.
S. Suzuki, G. Rees and H. K. D. H. Bhadeshia
"Kinetics and Mechanism of Bainite Transformation in High Strength Steels"
Advanced Materials -93, Proceedings of the third international symposium,
eds. A. ul Haq, F. Habbiby and A. Q. Khan,
A. Q. Khan Research Laboratories,
Rawalpindi, Pakistan, 1993, 247-254.
A. Ali and H. K. D. H. Bhadeshia
"Atomic Structure of Mechanically Alloyed Steels"
Structural Applications of Mechanical Alloying,
ASM International,
September 1993, 77-82.
T. S. Chou, H. K. D. H. Bhadeshia, G. McColvin and I. Elliott
"Recrystallisation and Microtexture Development in an Al-Fe Alloy"
Proceedings of an International Conference on Recrystallisation, Rome, 1992
N. Deards and H. K. D. H. Bhadeshia
"Grain Boundary Topology in Mechanically Alloyed MA6000"
Proceedings of Heat Treatment '92", edited by I. Tamura,
Kyoto, Japan, 269-272, 1992.
K. Murakami, H. Harada and H. K. D. H. Bhadeshia
"Effect of Stress on Bainitic Transformation in a Fe-Mn-Si-C Alloy"
Proceedings of ICOMAT '92, Monterey, California, USA, eds.
C. M. Wayman and J. F. Perkins,
Published by the Monterey Institute for Advanced Studies, 1992,
pp. 749-754.
A. Matsuzaki, H. K. D. H. Bhadeshia and H. Harada
"Tempering of Martensite Under the Influence of an Externally Applied Stress"
G. R. Speich symposium, Iron and Steel Society,
AIME, Warrendale, PA, USA, 1992, pp.47-52.
A. Matsuzaki, H. K. D. H. Bhadeshia and H. Harada
"Carbon Redistribution at Dissimilar Steel Joints"
International Trends in Welding Research, eds. S. A. David and J. M. Vitek,
ASM International, Ohio, USA, 1992, pp. 315-320.
J. Race and H. K. D. H. Bhadeshia
"Autogenous Electron Beam Welds across Dissimilar Stainless Steel:
Solidification Sequences"
International Trends in Welding Research,
eds. S. A. David and J. M. Vitek,
ASM International, Ohio, USA, 1992, pp. 181-186.
S. Tsukamoto, H. K. D. H. Bhadeshia and H. Harada
"Simulation of Weld Metal Microstructure and Properties"
Proceedings of CAMSE '92 (Computer Aided Innovation of New Materials),
eds. M Doyama, J. Kihara, M. Tanaka and R. Yamamoto,
Elsevier Science Publishers, B.V., 1993, 1729-1734.
H. K. D. H. Bhadeshia
"Mechanically Alloyed ODS Steels & Superalloys:
A Study of Directional Recrystallisation using Differential Scanning Calorimetry"
Materials Science Forum, Vol. 88-90, 1992, pp. 213-220.
K. Mino, H. Harada, H. K. D. H. Bhadeshia and M. Yamazaki
"Theoretical Analysis of The Displacive Transformation of
Austenite to Ferrite in a Fe-Mn-Si-C alloy"
Proceedings of the 2nd International Symposium on Advanced Materials,
published by the A Q Khan Laboratories, Pakistan, pp. 224-232, 1992.
S. A. Mujahid and H. K. D. H. Bhadeshia
"Directional Recrystallisation in an Aluminium Alloy"
Materials Science Forum, Vol. 94, 1992, pp. 741-746.
N. Deards and H. K. D. H. Bhadeshia
"Modelling of Steel Welds"
Materials Science and Technology, Vol. 8, 1992, pp. 123-133.
H. K. D. H. Bhadeshia
"A New Model for Simultaneous Transformation Kinetics in Power Plant
Steels"
Proceedings of Creep '96: Creep Resistant Metallic Materials,
published by Vítkovice, Ostrava, Czech Republic, 1996, pp. 83-91.
J. D. Robson and H. K. D. H. Bhadeshia
"Modelling the Mechanical Properties in the HAZ of Power
Plant Steels"Mathematical Modelling of
Weld Phenomena-3,
eds. H. Cerjak and H. K. D. H.
Bhadeshia, Institute of Materials, 1997, 403-442.
T. Cool, H. K. D. H. Bhadeshia and D. J. C. MacKay
"Modelling the Development of Microstructure in Power Plant Steels"
Microstructural development and stability in high chromium
ferritic power plant steels,
eds. A. Strang and D. J. Gooch,
Institute of Materials, London, 1997, pp. 179-208
J. D. Robson and H. K. D. H. Bhadeshia
"New Bainitic Steels by Design"
Modelling and Simulation for Materials Design,
eds. S. Nishijima and H. Onodera,
published by the National Research Institute for Metals, Japan,
1996, pp. 227-232.
H. K. D. H. Bhadeshia
"Effects of Stress & Strain on Formation of Bainite in Steels"
Hot Workability of Steels and Light Alloys-Composites,
eds H. J. McQueen, E. V. Konopleva and N. D. Ryan,
Canadian Institute of Mining, Minerals and Petroleum,
Montreal, Canada (1996) 543-556.
H. K. D. H. Bhadeshia
"Modelling of Allotriomorphic Ferrite in Steel Welds"
Mathematical Modelling of Weld Phenomena-3,
eds. H. Cerjak and H. K. D. H. Bhadeshia,
Institute of Materials, 1997, 181-198.
K. Ichikawa and H. K. D. H. Bhadeshia
"Modelling the Mechanical Properties in the HAZ of Power
Plant Steels" Mathematical Modelling of
Weld Phenomena-3, eds. H. Cerjak and H. K. D. H.
Bhadeshia, Institute of Materials, 1997, 403-442.
T. Cool, H. K. D. H. Bhadeshia and D. J. C. MacKay
"Modelling the Development of Microstructure in Power Plant Steels"
Microstructural development and stability in high chromium
ferritic power plant steels, eds. A. Strang and D. J. Gooch,
Institute of Materials, London, 1997, pp. 179-208
J. D. Robson and H. K. D. H. Bhadeshia
"Computer Modelling of Low Alloy Steel Welds"
Welding & Metal Fabrication, Vol. 64, 1995, 23-24.
A. J. Summerfield, T. Cool, B. R. Keville and H. K. D. H.
Bhadeshia
"New Bainitic Steels by Design"
Modelling and Simulation for Materials Design, eds. S. Nishijima and H.
Onodera,
published by the National Research Institute for Metals, Japan, 1996, pp.
227-232.
H. K. D. H. Bhadeshia
"Effects of Stress & Strain on Formation of Bainite
in Steels"
Hot Workability of Steels and Light Alloys-Composites, eds H. J.
McQueen, E. V. Konopleva and N. D. Ryan, Canadian Institute of Mining,
Minerals and
Petroleum, Montreal, Canada (1996) 543-556.
H. K. D. H. Bhadeshia
"Model for Solidification Cracking in Low-Alloy Steel Weld Metals"
Science and Technology of Welding and Joining, Vol. 1, 1996, pp.
43-50.
K. Ichikawa, H. K. D. H. Bhadeshia and D. J. C. MacKay
"Solid-State Nucleation of Acicular Ferrite on Minerals Added to
Molten
Steel"
Acta Materialia, Vol. 45, 1997, 739-748.
M. Gregg and H. K. D. H. Bhadeshia
"A New Model for Simultaneous Transformation Kinetics in Power Plant
Steels"
Proceedings of Creep '96: Creep Resistant Metallic Materials, published by
V\'itkovice, Ostrava, Czech Republic, 1996, pp. 83-91.
J. D. Robson and H. K. D. H. Bhadeshia
"Topology of Grain Deformation"
Materials Science and Technology, 14, 1998, 832-834.
S. B. Singh and H. K. D. H. Bhadeshia
" The Evolution of Solutions: Thermodynamic Analysis of
Mechanical Alloying"
Metallurgical and Materials
Transactions A, Vol. 28A, 1997, pp.2189-2194. A. Y. Badmos and H. K.
D. H. Bhadeshia
"Power Plant Steels: Remanent Life Assessment and the
Approach to Equilibrium
4th International Charles Parsons Turbine Conference, Advances in
Turbine Materials, Design and Manufacturing, eds A.
Strang, W. M. Banks, R. D. Conroy and M. J. Goulette, Institute of
Materials, London, 1997, 718-741. H. K. D. H. Bhadeshia
"New Bainitic Steels"
Displacive Phase Transformations and their Applications in Materials
Engineering,
eds K. Inoue, K. Mukherjee, K. Otsuka and H. Chen, The Minerals, Metals and Materials Society, Warrendale, Pennsylvania, U.S.A., (1998)
H. K. D. H. Bhadeshia
"Kinetics of the Widmanstatten Ferrite Transformation"
Displacive Phase Transformations and their Applications in Materials
Engineering,
eds K. Inoue, K. Mukherjee, K. Otsuka and H. Chen, The Minerals, Metals and Materials Society, Warrendale, Pennsylvania, U.S.A., (1998),
419-426.
S. J. Jones and H. K. D. H. Bhadeshia
"Design of Creep-Resistant Steel Welds"
Trends in Welding Research, eds S. A. David, T. DebRoy, J. A. Johnson, H. B. Smartt and J. M. Vitek, ASM International, Ohio, 1999, pp. 795-804.
H. K. D. H. Bhadeshia
"Precipitation Reactions in 3Cr1Mo Power Plant Steel"
Advanced Heat Resistant Steel for Power Generation, eds R. Viswanathan and J. Nutting, Institute of Materials, London, 1998, pp. 223-233.
N. Fujita and H. K. D. H. Bhadeshia
"Modelling of Phase Transformations in Steel Welds"
Proceedings of ECOMAP '98 (Environment Concious Innovative Materials Processing), Kyoto, Japan, published by the High Temperature Society of Japan, (1998) pp. 35-44.
H. K. D. H. Bhadeshia
"Estimation of Creep Rupture Strength in Nickel Base Superalloys"
Materials for Advanced Power Engineering 1998, Proceedings of the 6th
Liege Conference, Universite de Liege (1998) 1401-1410.
H. Fujii, D. J. C. MacKay, H. K. D. H. Bhadeshia, H. Harada and K. Nogi
"Kinetics of Simultaneous Transformations"
Proceedings of Solid-Solid Phase Transformations '99 (JIMIC-3), eds M. Koiwa, K. Otsuka and T. Miyazaki, Japan Institute for Metals, Kyoto, Japan, 1999, pp. 1445-1452.
H. K. D. H. Bhadeshia
"Design of Creep-Resistant Steels"
Proceedings of Ultra-Steel 2000, National Research Institute for Metals, Tsukuba, Japan, 2000, pp. 89-108.
H. K. D. H. Bhadeshia
"Royal Society Charles Algernon Parsons Memorial Lecture, 2000"
Proceedings of Parsons 2000, Advanced Materials for 21st Century Turbines and Power Plant, eds A. Strang, W. M. Banks, R. D. Conroy, G. M. McColvin, J. C. Neal and S. Simpson, published by The Institute of Materials, London, 2000, pp. 4-39. Also published in ISIJ International, Vol. 41, 2001, 626-640.
H. K. D. H. Bhadeshia
"Design of novel high-strength bainitic steels: Part I " Materials Science and Technology, Vol. 17, 2001, 512-516.
Also published in the Spanish language, Revista de metalurgia, Vol. 38, 2002, 3-13.
F. G. Caballero, H. K. D. H. Bhadeshia, K. J. A. Mawella, D. G. Jones and P. Brown
"Design of novel high-strength bainitic steels: Part II" Materials Science and Technology, Vol. 17, 2001, 517-522.
Also published in the Spanish language, Revista de metalurgia, Vol. 38, 2002, 3-13.
F. G. Caballero, H. K. D. H. Bhadeshia, K. J. A. Mawella, D. G. Jones and P. Brown
"Directional Recrystallisation and its Exploitation in
Mechanically Alloyed Metals"
21st Riso International Symposium on Materials Science, eds N. Hansen, X.
Huang, D. Juul Jensen, E. M. Lauridsen, T. Leffers, W. Pantleon, T. J.
Sabin and J. A. Wert, published by Riso National Laboratory, Denmark,
2000, pp. 15-28.
H. K. D. H. Bhadeshia
"Effect of Strain Heterogeneity on Recrystallisation of PM2000"
21st Riso International Symposium on Materials Science, eds N. Hansen, X.
Huang, D. Juul Jensen, E. M. Lauridsen, T. Leffers, W. Pantleon, T. J.
Sabin and J. A. Wert, published by Riso National Laboratory, Denmark,
2000, pp. 277-282.
C. Capdevila, Y. L. Chen, A. R. Jones and H. K. D. H. Bhadeshia
"Modelling Anisothermal Recrystallisation in Austenitic
Stainless Steels"
21st Riso International Symposium on Materials Science, eds N. Hansen, X.
Huang, D. Juul Jensen, E. M. Lauridsen, T. Leffers, W. Pantleon, T. J.
Sabin and J. A. Wert, published by Riso National Laboratory, Denmark,
2000, pp. 353-358.
G. J. Hopkin and H. K. D. H. Bhadeshia
"Aspects of Materials Education"
Materials World, Vol. 8, 2000, pp. 10-12. Also published in Japanese, in Kinsoku, Vol. 71, 2001, 841-844.
H. K. D. H. Bhadeshia
"Estimation of Microstructure in Steel Welds"
7th International Aachen Welding Conference on High Productivity Joining
Processes, editor U. Dilthey, published by Shaker Verlag, Aachen, Germany,
2001, pp. 817-830. H. K. D. H. Bhadeshia
"Design of Creep-Resistant Steel Welds"
Mathematical Modelling of Weld Phenomena - V
Published by the Institute of Materials, eds H. Cerjak and H. K. D. H. Bhadeshia, 2001, 431-448
D. G. Cole and H. K. D. H. Bhadeshia
"Strong and Tough Steel Welds"
Mathematical Modelling of Weld Phenomena - VI
Published by the Institute of Materials, eds H. Cerjak and H. K. D. H. Bhadeshia, 2001, in press
M. Murugananth, H. K. D. H. Bhadeshia, E. Keehan, H. O. Andren and L. Karlsson
"Components of the Creep Strength of Steel Welds"
Mathematical Modelling of Weld Phenomena - VI
Published by the Institute of Materials, eds H. Cerjak and H. K. D. H. Bhadeshia, 2001, in press
M. Muruganath and H. K. D. H. Bhadeshia
"Prediction of Ferrite Number in Stainless Steels"
Mathematical Modelling of Weld Phenomena - VI
Published by the Institute of Materials, eds H. Cerjak and H. K. D. H. Bhadeshia, 2001, in press
M. Vasudevan, M. Muruganath and A. K. Bhaduri
"High Strength Steel Weld Metals: Developments with Ni and Mn"
Today and Tomorrow in the Science and Technology of Welding and Joining, Proceedings of the 7th International Welding Symposium, Japan Welding Society, 20-22 November 2001, Kobe, Japan. Edited by T. Ohji, published by the Japan Welding Society, Tokyo, pp. 797-802.
E. Keehan, L. Karlsson, M. Marimuthu, H.-O. Andren and H. K. D. H. Bhadeshia
"Mechanical Stabilisation of Bainite" Advances in Materials and Materials Processing Proceedings of the International Conference, 1-4 February 2002, Kharagpur, India. Edited by U. Chaterjee and N. Chakraborti, published by Tata/McGraw-Hill, Dehli, (2002).
S. B. Singh and H. K. D. H. Bhadeshia
"Components of the creep strength of steel welds" Trends in Welding Research, eds S. A. David, J. Vitek, T. Debroy, J. Lippold and H. Smartt, ASM International, USA, 2002, in press.
M. Murugananth and H. K. D. H. Bhadeshia
"Residual Stress: Material Factors"" Handbook of Residual Stress and Deformation of Steel, eds G. Totten,
M. Howes and T. Inoue, ASM International, Materials Park, Ohio, 2002, 3--10.
H. K. D. H. Bhadeshia